Home Page Owners Registry Discussion Forums ProwlerMall Event Scrapbooks About
Prowler Products By Gary Tom Mills - Plymouth Prowler Parts
Call Gary E at Prowler Products By Gary - Formerly Carlini Design Call Tom for the BEST Park/Turn Signal Relocation Kit
Forum:Technical Questions & Answers
Topic:Tools Needed for Gas Tank Filler Replacement.
Want to register?
Who Can Post? Any registered users may post a reply.
About Registration You must be registered in order to post a topic or reply in this forum.
Your UserName:
Your Password:   Forget your password?
Message Icon:                                                             
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                      
Your Reply.:


*HTML is OFF
*UBB Code is ON

Insert Smilie into your post <-- Click on Smilie face
to insert a Smilie Into Your Message

Image Posting Instructions
Click here to upload a picture from your computerClick for UBB Code Help
Bold Italicized Underline Centered Insert Hyperlink into your post Insert Flash Animation into your post Insert Email hyperlink into your post Insert Image into your post Insert Audio into your post Insert Code into your post Insert Quote into your post Insert List into your post Insert Smilie into your post Click to check the spelling in your message
Mode:   Off     Help     Prompt     Inline  
Options Email Notification: E-mails sent to you whenever someone replies. Only registered users are eligible.
Disable Smilies in This Post.
Show Signature: include your profile signature. Only registered users may have signatures.
*If HTML and/or UBB Code are enabled, this means you can use HTML and/or UBB Code in your message.

           

If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
prwlynI finally bought the parts needed to do the TSB on slow gas filling on the 99-00 model. I'd like to find out if anyone, who did it yourself, needed any special tool or tools to complete the job before I tear it apart. TIA

I'll be taking pictures of the process incase someone else does it themselves also.

------------------
Fred J. Henkel
"Prowler is the Lord Of The Looks"
http://www.lordofthelooks.com

ed monahanFred, what parts are involved? I thought they just replaced the rubber filler hose near the top, but I never checked into it since it was done under warranty.
Hopefully it will not be too technical. Good luck.
toysOOPS

Toys

This message has been edited by toys on 03-05-2007 at 08:31 AM

prwlynEd, your correct but I haven't look at it yet and I thought I'd check now and not find out later that one tool I don't have is needed. The parts are a new "neck" and the filler hose that connects it to the tank. I'm thinking it only may take a screw driver but I'd like to be sure.

------------------
Fred J. Henkel
"Prowler is the Lord Of The Looks"
http://www.lordofthelooks.com

ed monahanFred, I don't know the answer. I was still under warranty and they fixed it (about 95 % or so). I still had a problem once in awhile.
TFischerFred: I think the special tool you're thinking about was for the gasket on the top of the tank, but I could be wrong. T

This message has been edited by TFischer on 03-05-2007 at 12:47 PM

prwlynWell I'm filling up just fine now, what a difference at the pump. I have posted a step by step with pictures on my website. Here Hope it helps someone else with this problem.

------------------
Fred J. Henkel
"Prowler is the Lord Of The Looks"
http://www.lordofthelooks.com

This message has been edited by prwlyn on 03-06-2007 at 06:37 PM

Steve ConleyTools needed to change filler & neck 1. jack 2.jack stand 3.lug wrench 4. Phillips screwdriver 5. 1/4 nut driver 6. droplight. This was all I needed when I did mine.
1buddycExcellent instructions Fred, I'm "Saving" them to my Prowler How to file. I've had the kit for a year and never got around to replacing the parts, YET. Guess I'll call Alley Cat and see if he can come over to help me remove my rear wheels....lol Thanks, Buddy.
David Veu Casovic
prwlynBy the way, if you have the BIG Prowler Shop Manual this is all laid out in Section 14, pages 20 - 21.

------------------
Fred J. Henkel
"Prowler is the Lord Of The Looks"
http://www.lordofthelooks.com

GunsmokeDoes anyone have the pictures and procedures for the fuel neck and tube update? I tried clicking on the link posted but comes back “server not found”
ed monahanFred passed away about 10 years ago so that site is lost forever.
FormerDodgeGuy

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2020

POA Terms of Service